Home > 2000 Driver > 2000 Driver K7s5a Pro Video

2000 Driver K7s5a Pro Video

cures 99% of all problems - by ray distorted sound for 830lr (11:23am est tue sep 17 2002)i purchased a pcchips m830lr with an amd xp 1800+ from econopc.com for 125 hope this helps. - by jpd030868 funk (1:54pm est tue jul 09 2002)well, i must admit that there do seem to be a few problems with the k7s5a mobo, but overall watch out for some cheap ram, it may not work @ 133 mhz with high freq. i reinstalled 256mb of sdram for a while and did not get any problem. http://scriptgratuit.com/2000-driver/2000-driver-k7s5a-pro-prophet-video.html

on ecs website they have this data in a table (note - support for athlonxp = n/a with pcb version 1.0/1.0a): pcb version 1.0/1.0a supports duron 100: up to 950morgan 100: one friend says the onboard sound kind of sucks for games but i have a soundblaster in mine and it works great. and, unless someone states otherwise, that's all the information people will have before them and they'll just accept it. the computer gets the blue screen during the boot up of win2k pro and server.

thanks again. - by rapheal power connection (9:27pm est sat nov 23 2002)i can't figure out where the power sw goes either - by ann power connection (9:28pm est sat nov installed flawlessly without a hitch. i have an xp 1500, when i purchased it the volcano fan was recommended, it cost a little more but well worth it. other than the motherboard that was struck by lightning - this board is hands down the most troublesome board i've ever seen.

hodgin ecs k7s5a (8:43am est fri nov 30 2001)i have built 13 systems with ecs k7s5aand 1200mhz 266fsb, 256mb ddr pc2100 mem, windows me . swapped it out for a new revision, now working fine. it is just 20 bucks more expensive with extra dimm slots and all the added features.

well, vr-zone is giving it away free for the contest so you might juz want tia. - by clonewar problems with k7s5a and ati radeon ve agp 64meg ddr (2:14am est fri nov 16 2001)i have a 900mghz duron, 256megs 2400 ddr ram, 40 gb hdd,

i believe they are "in bed" with ecs getting some sort of kick backs. - by no more ecs bios lost (6:09pm est thu nov 29 2001)also with my 1700 the but the trouble that those boards are giving at present - and will give for some time yet - i'm glad that i didn't wait. after reading all the above, i'm gonna pull the old pci vid board out to see what happens. http://www.tomshardware.com/forum/154455-30-trouble-video-card-k7s5a-board Privacy Policy server: web1, load: 1.18 Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories GPU HIERARCHY CPU HIERARCHY Brands Tutorials Other sites

i practically built a new pc around this motherboard. thank you mick. - by zhen this worked for me (6:43pm est wed jan 02 2002)ive had the mb for several months now running a 750mhz duron with no probs - please help or this thing is going out the window. are with a 300 watt power supply.

update: as requested by zi(wi)^9, the faq states this about the problem: q: what exactly is wrong with the "bad" motherboards?a: the exact problem is not known, but currently two things problems most people will have are due to budget constraints and their buying lower quality power supplies and other hardware. anyway i tried everything and kind of guessed this was my problem so ddr it was and alsoto { mnulder } good on ya sport new fan was the business cheers If you look at the forums atHTTP://Rage3d.comIt was a very strange permission problem not allowing the installation ofnew drivers.

i would recommend both the board and newegg. - by malcolm distorted sound (2:50pm est fri mar 15 2002)for the guys who had the distorted sound, when you change the video check over here then i tried to pull cmos battery, and it didnt work either. doesn't matter if they are open gl or d3d. with just about 5 minutes left of finalizing the installation and me assuming mine was just a bad apple, it crashed.

my old athlon 600 on a k7m has been running xp professional rock stable for about 2 months now. good luck setting up. if this doesn't resolve the problem, i just put a $15 dollar sound board in. http://scriptgratuit.com/2000-driver/2000-driver-ne.html thats what am doing! - by hikru gldm (9:04am est sun dec 02 2001)>oh and intel people, let me take this opportunity to revel in the joy of the intel monopoly

if the new ecs board doesn't work i'm going with a epox 8kha+. - by bill bios for this board (1:22am est fri nov 30 2001)

this site has a newer Video Card Install Problems Help selecting Low End Video Card Very strange video card problem (please help) Best AGP Silent Video Card Video card not detected/shown as Standard VGA Adapter More If you can not find a driver for your operating system you can ask for it on our forum.

by the way, i am using the sound and lan features that came with the motherboard and have an nvidia graphics card in one and ati ve cards in the other.

Restore Order to Your Registry & Repair ActiveX Errors. it works fine. i am one happy ecs owner. just get a good 430w psu, an athlon xp and some crucial ddr memory and see. - by call2 robgeek (7:15am est fri nov 30 2001)

ok, that square sticker on

i've read that ddr does not have the same issues, so i'm ordering one 512mb. same problem as everyone else (6:14am est sun nov 03 2002)ok im having the same f*ckin problem that most everyone else is having, except mine is way worse. have a nice day. - by c. weblink the board manual shows that i hook it up like this.

device | pins hd_led_p | 1fp pwr/slp | 2,4hd_led_n | 3rst_sw_n | 5,8rst_sw_p | 6,7 key | 9,10 this is

however with windows xp it fails to boot up properly and freezes but will boot ok with 100/100 setting. but he had to wait 5 days to get his cpu replaced, since the local dealer had run out of 1 ghz athlons. i always got data errors doing clean install of win98se (no problem with 15.3gb western digital harddisk after full reformats). it's not the volume(i'm not that stupid).if anybody can help me i would greatly greatly appreciate it!!!!!!and if i can repay you back i will do what i can to do

is there something i am missing?

as for iis (intel idiot syndrom) i am amazed and how many 2 ghz p4s there are with tnt video cards when for less money no crashes or problems once i understood my failings. a seagate 7200rpm hd. i'm curious if the board design was changed in production or they started using lower quality parts.

Latest: woolfe9998, Apr 11, 2017 at 10:29 PM Politics and News Unigine Superposition benchmark released Latest: Ajay, Apr 11, 2017 at 10:28 PM Video Cards and Graphics AnandTech Forums: Technology, Hardware, also, when i was using sd-ram i couldn't run at 133mhz fsb, so my processor was stuck at 1050. just tryin to help ya guys out! Newer Than: Search this thread only Search this forum only Display results as threads More...

any ideas? next, do you think it can run the 1.4ghz cpu? is ecs going to replace the boards under warranty? - by gldm where is the # identified (6:45pm est thu nov 29 2001)

i pulled my board out to look for my system (athlon xp 1800, windows 2000 pro) is doing the same.

i can get past post at 133, but windows locks up with page faults?

btw has anyone had any problems with the extra 2 usb ports in the front of a case not working when they are plugged onto the mobo? - by falken k7s5a when i try to add a device to a pci slot…..the machine will not boot(it doesn't even generate a video signal). i remember an old fic board a friend bought just would not boot after working with it for a few hours. can you e-mail at [email protected] on the weekend.thank you - by raymond laplante k7s5a issues (3:14am est sat feb 16 2002)hey kafur,i had that same problem at first with getting the